Lubricant For Steel Industry

Expert EP Grease

Expert EP are industrial Lithium EP greases designed in different NLGI grades from 000 to 2 having extreme pressure properties. The greases are having high dropping point, Good mechanical stability, oxidation stability and water resistant properties recommended for industrial use with operating temperature from -20 to +130⁰ C.

Expert CS 460 WR Grease

Expert CS 460 Calcium Sulfonate Complex WR Grease is Light Brown colored high performance water resistant grease having the highest dropping point, making it an excellent choice for high temperature industrial applications. The grease is recommended for use in all weather conditions with operating temperature from 0 to +180⁰ C. Product can be tailor made in different base oil viscosity grades. 

Extended LC Grease

With dropping points above 260ºC, this type of grease can withstand peak operating temperatures of up to 240ºC for short periods of time. Continuous temperatures of 150ºC should not present a problem for grease formulated with mineral oils; This excellent high temperature performance results from a high melting point coupled with the very dense fiber structure of the soap matrix. Very small polar fibers strongly bind the base lubricant providing excellent protection against oxidation due to low heat transfer throughout the matrix. The grease covers wide range operating service temperature from -20 to +160⁰ C.

Expert HT-CLM Grease

Expert HT-CLM Bentone Grease is  brown/Black coloured grease formulated by using organo modified clay, highly refined heavy base oil, anti-oxidant  and anti- rust additives covering wide range operating service temperature from -20 to +180⁰ C. The product is available with Moly also designed to combat highly stringent operating conditions.

Expert Ploy Grease

Expert Polyurea are high performance greases that are often preferred choice for sealed-for-life applications. These greases have high operating temperatures, inherent ant oxidative properties, high thermal stability and low bleed characteristics. They also have a dropping point of approximately 270 degrees C. On average, polyurea greases can have a three to five times better life expectancy than lithium-based greases. The grease is recommended for use in all weather conditions with operating temperature from -10 to +180⁰ C. Product can be tailor made in different base oil viscosity grades.